ENECLAD CFS is a two-component, 100% solids, clear concrete sealer that is virtually odor-free and has no V.O.C.’s. It has been specifically formulated to provide outstanding sealing and dust-proofing for all types of cement and mineral substrates.
ENECLAD CFS is very easy to apply by roller, brush or rubber squeegee. It penetrates and seals porous concrete providing a hard wearing, non-dusting, easy-to-clean surface.
ENECLAD CFS exhibits excellent abrasion and impact resistance. It holds up to most industrial cleaners, lubricants and common maintenance chemicals. It will seal and bond to concrete, marble, stone, brick, metal, terrazzo, slate, quarry tiles, pavers and wood.
|Ambient Temperature||Working Life||Light Load||Full Mechanical|
|41°F||5°C||2 hrs.||3 days||7 days|
|59°F||15°C||40 min.||10 hrs.||3 days|
|77°F||25°C||20 min.||5 hrs.||2 days|
|86°F||30°C||15 min.||3 hrs.||1 day|
|Typical Values||Test Method|
|Compressive strength||14,000 psi||980 kg/cm2||ASTM D-695|
|Flexural strength||9,500 psi||665 kg/cm2||ASTM D-790|
|Hardness - Shore D||80||ASTM D-2240|
|Tensile Shear Adhesion|
|Steel||3,000 psi||210 kg/cm2||ASTM D-1002|
|Adhesion - to prepared cementitious surfaces is greater than the cohesive strength of the substrate.|
|Acetic acid (0-5%)||G||Methyl alcohol||G|
|Acetone||G||Methyl ethyl ketone||G|
|Ammonia solution (0-10%)||EX||Nitric acid (0-10%)||G|
|Aviation fuel||EX||Palmitic acid||EX|
|Butyl alcohol||G||Phosphoric acid (0-5%)||EX|
|Calcium chloride||EX||Phosphoric acid (5-10%)||G|
|Crude oil||EX||Potassium chloride||EX|
|Diesel fuel||EX||Propyl alcohol||G|
|Ethyl alcohol||G||Sodium chloride||EX|
|Heptane||EX||Sulfuric acid (0-50%)||G|
|Hydrochloric acid (0-10%)||EX||Tannic acid||EX|
|Hydrochloric acid (10-20%)||G||Toluene||G|
EX - Suitable for most applications including immersion
G - Suitable for intermittent contact, splashes, etc.