CHEMCLAD SC is a two component, 100% solids, polymer system used for creating an outstanding corrosion and chemical resistant protective coating on all types of potable water equipment and structures.
CHEMCLAD SC is simple to use. It mixes easily and can be applied by brush or roller. It is available in different colors to simplify overcoating. This high gloss coating yields a surface that's not only functional, but also aesthetically pleasing.
CHEMCLAD SC provides extraordinary protection to machinery equipment and structures in some of the most severe industrial environments.
Prior to applying CHEMCLAD SC to concrete and / or cementitious substrates, the surface should be treated with CHEMCLAD® P4C to seal the surface, minimize outgassing and insure that optimum adhesion is obtained.
Note: Other colors are available on a “special order” basis. However, there are minimum / multiple quantity requirements for such orders and there may be an increase in cost. Additionally, due to formulation restrictions, not all colors are possible for all materials. Speak to your local ENECON Sales Representative for more information.
Due to monitor / printer differences, actual colors may vary slightly from the representations appearing in this chart.
|Ambient Temperature||Working Life||Touch Dry||Maximum Overcoating||Full Cure|
|59°F||15°C||90 min.||24 hrs.||48 hrs.||6 days|
|77°F||25°C||70 min.||16 hrs.||24 hrs.||4 days|
|86°F||30°C||55 min.||8 hrs.||16 hrs.||3 days|
|Typical Values||Test Method|
|Tensile Shear Adhesion|
|Steel||2300 psi||162 kg/cm2||ASTM D-1002|
|Aluminum||1700 psi||120 kg/cm2||ASTM D-1002|
|Copper||2200 psi||156 kg/cm2||ASTM D-1002|
|Stainless Steel||2500 psi||176 kg/cm2||ASTM D-1002|
|Elcometer Adhesion - to properly prepared cementitious surfaces is greater than the cohesive strength of the substrate.|
|Acetic acid (0-10%)||G||Methyl ethyl ketone||NR|
|Acetic acid (10-20%)||NR||Naptha||EX|
|Acetone||NR||Nitric acid (0-10%)||G|
|Aviation fuel (JP-4)||EX||Nitric acid (10-20%)||G|
|Calcium chloride||EX||Phosphoric acid (0-10%)||G|
|Carbon tetrachloride||G||Phosphoric acid (10-20%)||G|
|Crude oil||EX||Propyl alcohol||EX|
|Ethyl alcohol||G||Sodium chloride||EX|
|Heptane||EX||Sulfuric acid (0-20%)||EX|
|Hydrochloric acid (0-20%)||EX||Toluene||NR|
EX - Suitable for most applications including immersion
G - Suitable for intermittent contact, splashes, etc.
NR - Not Recommended