ENECRETE DuraFill is a two component, 100% solids, high performance polymer system specifically designed for broadcast flooring applications as well as for filling deeper holes and cavities in concrete. In both cases, the DuraFill is combined with locally sourced aggregates to provide unrivaled performance in some of the most demanding floor repair and protection applications.
ENECRETE DuraFill is very versatile. It exhibits extraordinary adhesion to virtually any type of mineral substrate as well as most metals. It has excellent compressive strength, impact resistance as well as thermal shock resistance. DuraFill is not only for concrete; it will also bond to marble, slate, stone, brick, terrazzo, tiles, most metals, wood…even rigid plastics and glass!
ENECRETE DuraFill can be used with colored aggregates to create aesthetically pleasing broadcast floor systems.
|Ambient Temperature||Working Life||Touch Dry||Full Cure|
|59°F||15°C||90 min.||10 hrs.||7 days|
|77°F||25°C||45 min.||5 hrs.||4 days|
|86°F||30°C||30 min.||3 hrs.||3 days|
|Typical Values||Test Method|
|Compressive strength||10,000 psi||700 kg/cm2||ASTM D-695|
|Flexural strength||9,000 psi||630 kg/cm2||ASTM D-790|
|Hardness - Shore D||80||ASTM D-2240|
|Tensile Shear Adhesion|
|Steel||3,000 psi||210 kg/cm2||ASTM D-1002|
|Adhesion - to prepared cementitious surfaces is greater than the cohesive strength of the substrate.|
|Kerosene||EX||20% Salt solution||EX|
|50% Anti-freeze||EX||20% Calcium chloride||EX|
|Transmission fluid||EX||10% Hydrochloric acid||EX|
|Power steering fluid||EX||10% Sulfuric acid||EX|
|Motor Oil||EX||10% Sodium hydroxide||EX|
EX - Suitable for most applications including immersion
G - Suitable for intermittent contact, splashes, etc.